Get a Free Trial Now bookmark

WELCOME TO
THE PIAVET
COMMUNITY!

Today is the first week of your 4-weeks of trial period, you can access your measurements online from wherever you are. Let’s set up your clinic on Piavet Platform!

Veterinarian and horse using Piavet from Piavita

BEFORE YOUR

MEASUREMENT,

MAKE SURE:


The Piavet Measuring Device and Base Station 
are fully charged


Your clinic is set up on the Piavet Platform


Internet is available in order to run measurements from the Piavet Platform


Electrode gel is used for patients with
long fur or long-term monitoring

HOW TO START YOUR 1ST

MEASUREMENT?

Piavita Piavet system Step 1 cleaning mobile

01

CLEANING

①  Thoroughly clean the Piavet Measuring Device and the patient’s coat on the left side of the barrel.

②  Clipping is not necessary, but recommended for very long winter coats or long-term measurements.

02

APPLYING THE PIAVET BELT

  Open both the seals: the belt clip and velcro.

  Position the velcro opening on the withers of the horse, with the Piavet Measuring Device placeholder on the left side of the horse.

  Close the belt clip and the velcro.

  Adjust accordingly until the belt sits stable at the narrowest point of the barrel.

Piavita Piavet system Step 2 apply piavet belt
Piavita Piavet system Step 3 rinse the coat

03

RINSING THE COAT

①  Rinse the coat generously with the alcohol solution in the area underneath the Piavet Measuring Device placeholder. In order to access the area that you want to rinse, pull the Piavet Belt sideways. 

  Readjust the Piavet Belt ensuring it sits at the narrowest point. At this position, tighten it snuggly using the loose end at the clip as well as the velcro. 

04

APPLYING THE PIAVET MEASURING DEVICE

①  Pull the silver button to open the placeholder.

  Place the Measuring Device inside the placeholder with the heatflux pointing to the right and the light at the top. The brackets should be under the Measuring Device to fasten it into place.

③  Push the silver button until it clicks.

Piavita Piavet system Step 4 apply measuring device
Piavita Piavet system Step 5 start recording

05

START MEASURING ON PIAVET PLATFORM

Simply click on the ‘New Recording’ button on the Piavet Platform and follow the steps. Refer to the tutorial introduction on the Piavet Platform if you need.

WELCOME TO
THE PIAVET
COMMUNITY!

Today is the first week of your 4-weeks of trial period, you can access your measurements online from wherever you are. Let’s set up your clinic on your Piavet Platform!

Veterinarian and horse using Piavet from Piavita

WELCOME TO THE PIAVET COMMUNITY!

Today is the first week of your 4-weeks of trial period, you can access your measurements online from wherever you are. Let’s set up your clinic on your Piavet Platform!

Veterinarian and horse using Piavet from Piavita

BEFORE YOUR

MEASUREMENT,

MAKE SURE:


The Piavet Measuring Device and Base Station 
are fully charged


Your clinic is set up on the Piavet Platform


Internet is available in order to run measurements from the Piavet Platform


Electrode gel is used for patients with
long fur or long-term monitoring

HOW TO START YOUR 1ST MEASUREMENT?

BEFORE YOUR

MEASUREMENT,

MAKE SURE:


The Piavet Measuring Device and Base Station 
are fully charged


Your clinic is set up on the Piavet Platform


Internet is available in order to run measurements from the Piavet Platform


Electrode gel is used for patients with
long fur or long-term monitoring

HOW TO START YOUR 1ST MEASUREMENT?

Piavita Piavet system Step 1 cleaning mobile

01

CLEANING

①  Thoroughly clean the Piavet Measuring Device and the patient’s coat on the left side of the barrel.

②  Clipping is not necessary, but recommended for very long winter coats or long-term measurements.

Piavita Piavet system Step 2 apply piavet belt

02

APPLYING THE PIAVET BELT

  Open both the seals: the belt clip and velcro.

  Position the velcro opening on the withers of the horse, with the Piavet Measuring Device placeholder on the left side of the horse.

  Close the belt clip and the velcro.

  Adjust accordingly until the belt sits stable at the narrowest point of the barrel.

Piavita Piavet system Step 1 cleaning mobile

03

RINSING THE COAT

①  Rinse the coat generously with the alcohol solution in the area underneath the Piavet Measuring Device placeholder. In order to access the area that you want to rinse, pull the Piavet Belt sideways. 

  Readjust the Piavet Belt ensuring it sits at the narrowest point. At this position, tighten it snuggly using the loose end at the clip as well as the velcro. 

Piavita Piavet system Step 4 apply measuring device

04

APPLYING THE PIAVET MEASURING DEVICE

①  Pull the silver button to open the placeholder.

  Place the Measuring Device inside the placeholder with the heatflux pointing to the right and the light at the top. The brackets should be under the Measuring Device to fasten it into place.

③  Push the silver button until it clicks.

Piavita Piavet system Step 5 start recording

05

START MEASURING ON PIAVET PLATFORM

Simply click on the ‘New Recording’ button on the Piavet Platform and follow the steps. Refer to the tutorial introduction on the Piavet Platform if you need.